FirmTek, LLC
www.firmtek.com
Copyright
Copyright
©
1999-2004 FirmTek, LLC. All rights reserved.
No part of this manual may be
reproduced, translated by any means, photocopied, or transmitted in any form without the prior
written permission of FirmTek.
Trademarks
FirmTek, UltraTek, AV-Tek, SeriTek names and logotypes are trademarks of FirmTek, LLC.
Apple, Macintosh, Power Macintosh, Mac OS 9.XX, OS X, and the Mac logo are registered
trademarks of Apple Computer, Incorporated. The "Built for OS X" graphic is a registered
trademark of Apple Computer, Incorporated, and used under license. Windows, Windows
98/98SE, Windows 2000, Windows XP, and Windows 2003 are registered trademarks of
Microsoft Corporation in the United States and other countries. All other manufacturer product
names mentioned in this manual are for identification purposes only and are trademarks or
registered trademarks of their respective owners.
Changes
FirmTek reserves the right to make any changes to product design, specifications, or details
without notice. Actual product photos or screenshots may look different from those provided.
Notice
The material content of this manual is for informational purposes only. It is possible the content
of this manual may contain technical inaccuracies, typographical, or other errors. FirmTek
assumes no liability for any errors, omissions, or from the use of this manual that may result from
such errors, including, but not limited to loss of data or profits.
Before installing SeriTek/1EN2 or any other hardware or software, you are responsible for
backing up data contained on any storage devices. After hardware or software installation, you
are responsible for backing up data on any storage devices at frequent intervals. FirmTek, LLC is
not liable for any loss of data or damage to equipment resulting from the use of FirmTek products.
External Shielded Serial ATA Cables
The SeriTek/1SE2 uses specially shielded external Serial ATA cables to ensure integrity during
data transfers. These cables are not designed for heavy duty use. Use caution and handle the
cables carefully. When inserting and removing the cable, hold the connector at the ends (not the
cable) when inserting and removing the cable from the SeriTek/1SE2 and external enclosure.
If you will be using the SeriTek/1EN2 with a Macintosh computer, please note that Macintosh
computers require unique external shielded Serial ATA cables for maximum reliability. FirmTek
Serial ATA cables were specially designed to be compatible with both PC and Macintosh
computers. To ensure best fitting connections, please use only FirmTek external shielded Serial
ATA cables with the SeriTek/1SE2.
