Firman P03617 Скачать руководство пользователя страница 6

Page 04

WHEN OPERATING EQUIPMENT

DO NOT

 tip engine or equipment at angle 

which causes fuel to spill.

DO NOT

 stop engine by moving choke 

control to “Start” position. 

WHEN TRANSPORTING, MOVING 
OR REPAIRING EQUIPMENT

Transport/move/repair with fuel tank 
EMPTY or with fuel shutoff valve OFF.

DO NOT

 tip engine or equipment at angle 

which causes fuel to spill.
Disconnect spark plug wire.

WHEN STORING FUEL OR EQUIPMENT 
WITH FUEL IN TANK

WARNING


WARNING

Generator voltage could cause 
electrical shock or burn resulting 
in death or serious injury.

WARNING


NEVER

 start or stop engine with electrical 

devices plugged in and turned on.

WARNING

 

Fuel and its vapors are extremely flammable 
and explosive which could cause burns, fire, 
or explosion resulting in death or serious 
injury and/or property damage.

WHEN ADDING OR DRAINING FUEL

Turn generator engine OFF and let it cool at 
least 2 minutes before removing fuel cap. 
Loosen cap slowly to relieve pressure in tank.
Fill or drain fuel tank outdoors.

DO NOT

 overfill tank. Allow space for fuel 

expansion.

If fuel spills, wait until it evaporates before 
starting engine.

Keep fuel away from sparks, open flames, 
pilot lights, heat, and other ignition sources.

Check fuel lines, tank, cap, and fittings 
frequently for cracks or leaks. Replace if 
necessary.

DO NOT

 light a cigarette or smoke.


WHEN STARTING EQUIPMENT

Ensure spark plug, muffler, fuel cap, and air 
cleaner are in place.

DO NOT

 crank engine with spark plug 

removed.

Use approved transfer equipment, suitable 
for the intended use, to prevent backfeed by 
isolating generator from electric utility 
workers.

English                                                                                                                                                  Customer Service: 1-844-FIRMAN1

Содержание P03617











































Отзывы: