860-110/-111/-112/-113
P2008 © Firma WJG, Braunschweig. Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
Security Advices
•
Before using the device, please check it for any possible damages. In case of damage do not operate it.
•
Make sure that the output power of the connected amplifier does not exceed the power of the speaker
by far because it would damage the system.
•
The device may not become subject of mechanical stress and should not be exposed to humidity.
•
To be considerate of the ventilation do not cover the device and protect it from direct solar radiation.
•
Clean the device with a dry and soft cloth only.
•
Caution! Should the device itself get damaged, please let the repair to the manufacturer or to a qualified
service agent.
•
Please dispose packaging materials properly and do not let play children with it.
•
The device itself is no toy either. Do not let children play with it too.
Installation:
Connect the speaker either to the car radio directly or to an additional car amplifier which is recommended.
Install the speaker e.g. into the back shelf or the door lining
of the car.
In every case pay attention to the installation depth (1) and
the magnet diameter (2).
Mark out the cutaway and the drill holes by using the
assembly ring (1).
Cut out the hole and drill the holes (2).
Cable to the speaker (1).
Cable to the car amplifier to the radio (2).
Pay attention to the correct polarity by using the color code
of the wires (3).
