9.
Program the Wireless Remote by pressing and
holding the reset button on the side of the
Control Box. While the reset button is held press
either the
up
or
down
button on the wireless remote
once. Release the reset button and the Wireless
Remote is ready for use.
10.
The Wireless Remote can be used for
non-momentary operation. Press the
up
button once to move the lift up and press the
up
or
down
button to stop the lift at any time.
Press the
down
button once to move the lift
down and press the
down
or
up
button to stop
it.
11.
For momentary control use the optional
Rocker Switch. Plug it into the Control Box
and hold “2” on the Rocker Switch to move the lift
up and hold “1” to move the lift down.
www.firgelliauto.com
12.
To stop the TV lift from retracting fur-
ther than desired you may install the
External Limit Switch. This step is completely
optional
and does not need to be completed in
order for the TV lift to operate. The Limit Switch
stops the lift from moving once it is pressed.
Plug the Limit Switch into the Control Box and
then install it so it will be pressed while the lift is
moving up and right before the Drywall Bracket
touches the ceiling. You may need to make a
bracket to screw the Limit Switch to.
page 6