14
© 2020 Carrier
ORDERING INFORMATION: RETRACTABLE MOUNT HESI IGNITER
RETRACTABLE HESI IGNITER SPECIFICATION STEPS (Refer to figure 3)
1.
Select the appropriate HESI Power Pack (P/N SF1-X).
2.
Select the appropriate HESI Interconnecting Cable (P/N SF1-CA1-XX).
3.
Select the appropriate HESI Rod, (P/N SFR-XXX), taking note of the minimum external
(retracted) length shown on Figure 3.
4.
Select the appropriate Retractor Assembly (P/N SF1-RET-X).
5.
Select the appropriate optional
retraction
mounting tube (P/N MT1R-XXX).
1.
SELECT THE APPROPRIATE HESI POWER PACK
PART NUMBER
DESCRIPTION
SF1-1
SureFire HESI Power Pack, 110 vac, NEMA 4 (painted steel)
SF1-2
SureFire HESI Power Pack, 220 vac, NEMA 4 (painted steel)
SF1-3
SureFire HESI Power Pack, 110 vac, NEMA 4X (stainless steel)
SF1-4
SureFire HESI Power Pack, 220 vac, NEMA 4X (stainless steel)
2.
SELECT THE APPROPRIATE HESI INTERCONNECTING CABLE
PART NUMBER
DESCRIPTION
SF1-CA1-06
SureFire HESI interconnecting cable with connectors, 6 feet long
SF1-CA1-09
SureFire HESI interconnecting cable with connectors, 9 feet long
SF1-CA1-12
SureFire HESI interconnecting cable with connectors, 12 feet long
SF1-CA1-15
SureFire HESI interconnecting cable with connectors, 15 feet long
3.
SELECT THE APPROPRIATE SUREFIRE HESI SPARK ROD
The spark rod part number will start with “SF1”, followed by three digits. These three digits specify
the rod length (in inches) available in two inch increments from 14” (“014”) to 180” (“180”).
SFR –XXX
High Energy Spark Igniter
Spark Rod
Length in inches
(014 through 180)
in 2” increments
EXAMPLE:
Specify a SureFire HESI Spark Rod - 72 inches
long. Specify part number:
SFR – 072
