background image

4

Wire the EC485 converter to the E340 controls in the following manner:

For complete details on wiring and communicating with the E340 controls refer to bulletin BW-1000
(BoilerWorx, Windows 95 based software).

NOTICE

When Fireye products are combined with equipment manufactured by others and/or integrated into
systems designed or manufactured by others, the Fireye warranty, as stated in its General Terms and
Conditions of Sale, pertains only to the Fireye products and not to any other equipment or to the
combined system or its overall performance.

WARRANTIES

FIREYE guarantees for 

one year from the date of installation or 18 months from date of manufacture

of its products to replace, or, at its option, to repair any product or part thereof (except lamps, elec-
tronic tubes and photocells) which is found defective in material or workmanship or which otherwise
fails to conform to the description of the product on the face of its sales order. 

THE FOREGOING

IS IN LIEU OF ALL OTHER WARRANTIES AND FIREYE MAKES NO WARRANTY OF
MERCHANTABILITY OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED.

 Except as

specifically stated in these general terms and conditions of sale, remedies with respect to any product
or part number manufactured or sold by Fireye shall be limited exclusively to the right to replacement
or repair as above provided. In no event shall Fireye be liable for consequential or special damages of
any nature that may arise in connection with such product or part.

FR. GRD

SHLD
TDA (-)

TDB (+)

RDA (-)

RDB (+)

+12VDC

GND

ECHO

ON

OFF

RTS

SD

CONTROL

ED612

120 VAC
50/60Hz

COMMUNICATION TERMINATOR

ON LAST E340 CONTROL

(COM B) TERMINAL 80

(COM A) TERMINAL 81

TO E340 CONTROLS

(COM B) TERMINAL 80

(COM A) TERMINAL 81

DATA COMMUNICATION LINK

DB25 CONNECTOR
TO COMPUTER’S
RS232 SERIAL 
COMMUNICATION
PORT

WHITE STRIPE
TO +12 VDC

EC485 CONVERTER

Note: The two jumpers on the EC485 converter should be set to “RTS” and “Echo Off.”

Note: TD (A) and RD (A) on EC485 converter connected to Terminal 80 (COM B) of E340 control.

TD (B) and RD (B) on EC485 converter connected to Terminal 81 (COM A) of E340 control.

61-6689 12 VDC POWER SUPPLY

FIREYE

EC-4851

3 Manchester Road

February 6, 2017

Derry, New Hampshire 03038

 Supersedes APRIL 8, 2013

www.fireye.com

Содержание EC485

Страница 1: ...ack mounted on a PC board to provide an easy method to use the ED512 cables to interface to the EP programmers when customizing E300 mes sages The EC485 also includes a 120 VAC to 12 VDC power supply RS 485 Driver Control RTS SD Jumper The RS 485 side of the converter must be enabled to transmit data and disabled when not transmit ting Via a jumper on the converter either RTS or SD is selected as ...

Страница 2: ... CABLE CONNECTIONS DB25 to DB9 2 Connect the ED612 RJ12 female connector provided with the EC485 to terminals TD A TD B RD A and RD B on the EC485 The pins on the ED610 will line up with the terminals on the EC485 converter 3 Set the jumpers on the EC485 converter to SD and ECHO OFF See diagram below 4 Plug on end of the ED512 2 4 8 cable into the RJ12 jack on the ED612 and the other end into eith...

Страница 3: ...in wiring configuration The Fireye communication software program P N E720W is required for communication with the E340 controls Fireye recommends using the E500 Communication interface when communicating with the E340 controls since the E500 provides communication with the Flame Monitor flame safeguard con trols as well However the EC485 converter can be used to communicate only with the E340 con...

Страница 4: ...YE MAKES NO WARRANTY OF MERCHANTABILITY OR ANY OTHER WARRANTY EXPRESS OR IMPLIED Except as specifically stated in these general terms and conditions of sale remedies with respect to any product or part number manufactured or sold by Fireye shall be limited exclusively to the right to replacement or repair as above provided In no event shall Fireye be liable for consequential or special damages of ...

Отзывы: