HotPort 3203 Outdoor Wireless Mesh Node
iv
Safety Instructions
The HotPort 3203 outdoor wireless mesh node must be installed by a qualified
professional such as a licensed electrician. Failure to install this equipment properly may
result in equipment damage and personal injury or death.
Explanation of Graphic Symbols
This symbol is intended to alert the user to the presences of non-insulated dangerous
voltage that may be of sufficient magnitude to constitute a risk of lethal electric shock to persons.
This
symbol is intended to alert the user to the presence of important operating,
maintaining and servicing instructions in the literature accompanying the HotPort 3203. Failing to
comply with this instruction may result in electrical shock.
This
symbol is intended to alert the user to the presence of important operating,
maintaining and servicing instructions in the literature accompanying the HotPort 3203. Failing to
comply with this instruction may result in a hazard.
Caution! Risk of electric shock!
POWER LINES CAN BE LETHAL
Do not install the HotPort 3203 outdoor mesh node where possible contact with power lines can
be made. Antennas, poles, towers, guy wires, or cables may lean or fall and contact these lines.
People may be injured or killed if they are touching or holding any part of equipment when it
contacts electric lines. Make sure there is NO possibility that equipment or personnel can come in
contact directly or indirectly with power lines.
ASSUME ALL OVERHEAD LINES ARE POWER LINES
The horizontal distance from a tower, pole or antenna to the nearest power line should be at least
twice the total length of the pole/antenna combination. This will ensure that the pole will not
contact power if it falls either during or after installation.
SURVEYING THE SITE
Look over the entire site before beginning any installation and anticipate possible hazards. Never
assume anything without checking it out for yourself! Don't take shortcuts!
