Pg: 5
4. Use a match to light kindling or firestarter.
Storage
Reminders:
* Always wear protective gloves or a pot holder when
tending fire.
* Wait until glowing coals have developed before adding
any additional wood.
* Do NOT add gasoline,kerosene, diesel fuel, Lighter
fluid or alcohol to relight or enhance an existing fire.
1. Once the fire is out, coals are cold and outdoor fire
pit is cool to the touch, remove ashes and properly
dispose.
3. Store assembled in a location away from children
and pets.
WARNING
FOR YOUR SAFETY
Before using this outdoor fire pit, make sure you have
read, understand and are following all information
provided in the important safeguards presented on page
1. Failure to follow those instructions can cause death,
serious injury or property damage.
3. Rinse clean with water.
Tending the Fire
This outdoor fire pit should be cleaned on a regular
basis to promote safer experiences and longer product
life.
Note:
After repeated use, a slight discoloration of
the finish may occur.
2. While using a long handled fireplace tool, shift coals
and logs to allow additional airflow.
Care and Inspecting
Distributed By:
Fireside Escapes
Torrance, CA
Tel: 310-533-1177
www.firesideescapes.com
3. If additional wood is required, place wood on top
coals. Be careful not to shift ashes.
You may need to shift and/or add logs for an ideal
experience.
Do NOT move or store this outdoor fire pit until the fire
is COMPLETELY out.
1. Carefully remove spark arrestor by using the fire
tool.
This outdoor fire pit should be inspected on a regular
basis to ensure product safety and longer product life.
Do NOT attempt to inspect this outdoor fire pit until
the fire is COMPLETELY out.
2. Check components for any signs of damage or rust.
2. Do NOT use water to extinguish as this is dangerous
and can cause damage to this outdoor fire pit.
4. Replace spark arrestor by using the fire tool.
Extinguishing
1. Check handles to make sure they are secure.
1. Allow fire to burn itself out.
Operating Instructions
Cleaning
Lighting
3. If damage to any component is detected, do NOT
operate until repairs are executed.
Note: If you do not use a cover, store this outdoor fire
pit in a dry location to maximize product life.
5. Replace spark arrestor by using the fire tool once the
kindling or firestarter is lit.
4. Remove built-up creosote from components with a
chimney cleaning product.
Do NOT attempt to clean this outdoor fire pit until
the fire is COMPLETELY out.
Do NOT use oven cleaner or abrasive cleaners as
they will damage this product.
Do NOT clean any part of this outdoor fire pit in a
self cleaning oven as it may damage the finish.
1. Make sure there is only a small amount of ash in the
bottom of the bowl.
3. Place above that a layer of dry seasoned hardwood
that is cut to lengths no more than 3/4 the diameter of the
bowl.
2. Place a layer of dry kindling or a natural firestarter
onto the center of the grate.
1. Wipe exterior surfaces with a mild dishwashing
detergent or baking soda.
2. For stubborn surfaces use a citrus based
degreaser and a nylon scrubbing brush.
