Bed parts
- 2 bed rails (A)
- 2 headboard rails (B)
- 2 footboard rails (C)
- 2 headboard posts (D)
- 2 footboard posts (E)
- 5 headboard spindles (F)
- 5 footboard spindles (G)
- 3 slats (H)
- 3 slat supports (I)
- 1 hardware box (J)
A
B
C
D
E
F
G
H
I
J
*Note, actual pieces are not
marked with letters
2
Package Contents
Hardware
- 4 15/16” Hex lag screws (K)
- 4 washers (L)
- 9 1-5/8” wood screws (M)
- 2 bed plugs (N)
K
L
M
N
Recommended Tools
The following items are not sup-
plied but are necessary or recom-
mended for assembling this bed:
- Rubber mallet
- Power screwdriver
- 15/16” socket & ratchet
- Wood glue
Optional:
- 8 #8 three-inch wood screws
READ BEFORE ASSEMBLY
It is recommended that you assemble the bed once without glue and fasteners to ensure optimal fit and connections.
Unfinished Beds
If you purchased an unfinished bed, it is recommended that each piece of the bed be stained/sealed and fully dried
before putting the bed together. To ensure mortise and tenon joints are glue-friendly, use painters tape on tenons
during the sealing process to keep the tenons natural.
Checking/Cracking
It’s normal for all cedar log furniture to develop checks (cracks) in the wood. Checking occurs as a log releases mois-
ture across or through the annual growth rings. It does not affect the structural integrity of the wood. All logs which
contain the heart of the tree will develop lengthwise cracks or checks. The check never goes deeper than the heart.
