Firesense Woodberry 63688, Руководство пользователя

Страница: 6 / 18

6
2
3
Hardware Used:
Once all panels are bolted together,turn the table base
upside-down,then attach
Tank Support Bar to Leg F / G by
aligning the holes at each end of Tank Support Bar with the
holes at the bottom of each Leg .
Insert Bolt
P
throu g h Washer
Q
then into holes.Tighten gently
with Hex Wrench W . Then attach Tank Support Ring to the leg
of Door Panel
D
by aligning the hole in front of Tank S upport
Ring with the hole in the leg.
Insert Bolt
P
through Washer
Q
and then into the hole. Tighten
with Hex Wrench W .
Place Table Top C so underside faces up. Screw 4 Studs M into
the holes on t he Table Top using Screwdriver U .
Then carefully turn the assembled fire pit base upside-down
and align the holes in the top of the
Legs with the Studs
in the Table Top .
Place the holes over the Studs and secure each with Washer /
Spring Washer/Nut N as illustrated.
Tighten w ith Wrench V . Then place Plastic Caps T over Nuts .
3
&
2
G