Contact us for assistance: (866) 985-7877 | www.wtliving.com
5
ASSEMBLY
3
4
4
3
Loosen set-screws and
carefully slide
B
ottom Bracket
onto glass
with rubber foot pointed up
.
P
osition
edge of
glass
panel
flush with bracket edge.
Check that silicone
guards are in place, then s
ecure all
set-
screws, making sure
to not over-tighten.
Secure remaining three bottom
brackets using the same procedure.
Hardware Used:
Bottom
Bracket
x
4
Carefully, using two people,
turn
the assembl
ed wind
guard
upright
. Gently set the glass guard onto fire pit
,
positioning the feet flat and level at the corners of the
burner.
Be aware that the glass and hardware may become warm
or hot after prolonged burning of the fire pit and take
reasonable precautions to avoid burns.
CARE:
When wind guard is completely cool, it may be
cleaned with a soft cloth or paper towel and standard glass
cleaner. Never spray cleaner or water on a hot wind guard,
as it could crack or shatter.
