Firenzo CONTESSA Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 16

Firenzo CONTESSA Скачать руководство пользователя страница 14

Contessa Guide 16/05/2013

14

was properly installed and that the heater is defective and they have been
given the opportunity to rectify the defect.

c) The purchaser will be responsible for paying any service call fees or
transport charges on and damages and loss incurred in connection with the
transportation of the heater parts or accessories to and from Firenzo Australia
Pty or its accredited agents.

d) This warranty does not apply and Firenzo Australia Pty shall have no
obligation in respect to any heater part or accessory which has:

1. Been subject to misuse, neglect, or accident in transit, storage or
use.

2. Not been inspected for proper installation.

3. Not been operated or maintained in accordance with the
manufacturers printed instructions.

4. Been damaged through water, including any surface rust which

may occur in transit or storage and excluding such damage caused by
leakage if so proven to be faulty materials or workmanship on behalf of
Firenzo Australia Pty.

5. Been damaged due to normal wear and tear.

e) This warranty is expressly in lieu of all other warranties, expressed or
implied including the warranties of merchantability and fitness for a particular
purpose other than the warranties conferred by Firenzo Australia Pty, who
neither assumes nor authorises anyone else to assume their liability in
connection with the sale of the stove or any other parts or accessories
therefore.

i) Any claim under this warranty should be submitted first to the dealer from
whom the stove was purchased. In such cases where the dealer cannot be
located, the fully completed warranty claim form should be mailed to Firenzo
Australia Pty.

j) Notwithstanding the warranty and undertakings above, Firenzo Australia
Pty shall not be liable in any way whatsoever for consequential loss of any
kind.

Please complete for your future reference:

Serial No:

Date of Purchase:

Purchased from:

«
...
12
13
14
15
16
»

Содержание CONTESSA

















Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды