Firenzi FSS 600, Инструкция пользователя

Страница: 10 / 16

10
Something not working
SYMPTOM
„
The oven does not come on
„
The oven temperature light does not come on
„
The oven light does not come on
„
It takes too much time to finish the dishes, or they
are cooked too fast.
„
Steam and condensation settle on the food and the
oven cavity.
SOLUTION
‹
Check that both a cooking function and temperature
have been selected.
‹
Check the appliance is wired in properly, and the
socket switch or the switch from the mains supply to
the oven are ON.
‹
Select a temperature with the thermostat control
knob
‹
Select a function with the oven function control
knob.
‹
Select a function with the oven function control
knob
‹
Check the light bulb, and replace it if necessary
(see "Cleaning the Oven")
‹
The temperature may need adjusting
‹
Refer to the contents of this booklet, especially to
the chapter “Using the Oven”.
‹
Leave dishes inside the oven no longer than 15-20
minutes after the cooking is completed.
If after all these checks, the oven still does not work,
contact your local Service Force Centre quoting your
model and serial number, which can be found on the rating
plate.
Please note that it will be necessary to provide proof of
purchase for any in-guarantee service calls.
In-guarantee customers should ensure that the above
checks have been made as the engineer will make
a charge if the fault is not a mechanical or electrical
breakdown.
If the appliance is not working correctly, please carry out the following checks, before contacting your local Service
Force Centre.
IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation,
a charge will be made even if the appliance is under guarantee.
When you contact the Service Force Centre, they will
need the following information:
1. Your name, address and post code.
2. Your telephone number
3. Clear and concise details of the fault
4. The model and the serial number (see rating label)
5. Date of purchase