10/01/2021 Rev. 02
31
2.
File Icon
– The file icon indicates if a show file is downloaded on the FM. An “X”
over the file icon indicates there is no file downloaded. If no file is downloaded, the
name ID will read MANUAL.
3.
Link Quality (LQ) Icon
– The LQ icon displays the current signal strength between
the FM and CM.
4.
Battery Level Icon
– The battery level icon displays the current battery charge level
of the FM.
5.
Name ID Number
– Each FM must have a unique name ID number.
6.
Status Icon
– The status icon appears when the FM is firing/has fired a shot. This
icon will stay on the screen until the next cycle so that the operator may check FM
firing status before, during, and after the show.
7.
Messages
– Messages generated by the FM are displayed here, such as
CONNECTED if the FM is currently connected to the CM.
8.
Find Software Version
– Press the down (
↓
) arrow key to display the current
software version installed on the FM.
Section 4: Menu & Buttons
1.
Name
- Each FM must have a unique ID number before joining a CM. On each FM
press MENU, the NAME option on the
Figure 35
menu will be pre-selected, press
ENTER. Use the left (
←
), up (
↑
), right
(
→
), and down (
↓
) arrow keys to
choose a unique ID. Press ENTER to
set ID – valid ID numbers are 001 to
999.
2.
RF (Radio Frequency) Channel
- Use the WIRELESS WIZARD (WW) function on
the CM to determine the best RF channel in the surrounding area and to
automatically
change the RF channel of all connected FMs. To manually set an FM
RF channel,
from the Menu chose RF CHANNEL, ENTER use the up (
↑
) and down
(
↓
) arrow keys
Содержание Generation 3
Страница 1: ... 833 FIRELNX 833 347 3569 FIRELINX MANUAL Generation 3 ...
Страница 7: ...10 01 2021 Rev 02 7 Figure 1 ...
Страница 26: ...10 01 2021 Rev 02 26 Figure 29 ...
Страница 37: ...10 01 2021 Rev 02 37 Figure 40 Figure 41 ...
