6.9 Auto track continuously
6.9.1 Send SMS command “fix0password” to the tracker device, it will report
the Geo-info at 30s intervals for 5 times. (s:second, m:minute, h:hour). This command
must be in 3 digits and the maximum value is 255.
6.9.2 Unlimited times track: Send SMS "fix030s*** n+password" to the device.
6.9.3 Cancel: Send SMS “nofix+password” to the tracker device to cancel the “Auto track
continuously”.
. Note: the interval must be not less than 20s.
6.9.4 When the GPS signal is not good, the latitude and longitude you received is the last
position before going into GPS blind areas, if any bias with the location, pay
attention to the time stamp in the message.
6.10 Get location in absolute street address
6.10.1 You must set up the APN of your local GSM network for the SIM card in tracker
first before using this function, if there is user name and password for GPRS login,
Please refer to 6.31 and 6.32 to configure the APN, user name and password for
GPRS login.
6.10.2 After configure the APN, send “password” to device, it will reply SMS
including real street/address name. For example: No.8, Nantou Guankou 2nd Rd.
Nanshan district, Shenzhen, Guangdong, china.
6.11 Location based service (LBS)
When the tracker device doesn’t receive valid GPS signals, tracker will positioning by
location based service(LBS), the messages includes the GPS coordinates of the last position
in SMS mode, but the LAC in message is the current new position, the location can be seen
by input the LAC code in the menu “Manual Track” of web platform
www.gpstrackerxyz.com
, you can also send command “password” to tracker to get
the newest absolute address and GPS coordinates as well; tracker will automatically switch to
track by location based service in GPRS mode, and actualized on the map of web server with
