Warning
These appliances must be earthed.
Before installing or replacing the bulb, the appliance must be always
being disconnected from the 230V supply.
The appliance must be disconnected from the 230V supply before the lid
is opened.
The appliance mist be installed exclusively in perfect horizontal position.
Installation
Patio Heater ZHQ1533R is built with the best quality components in
accordance to the prevailing legal regulations and certified for safety in use.
For best results from the appliance please ensure that the installation is done
by a qualified electrician in accordance with the following instructions and
taking full account of current regulations. When using the heater, please
carefully follow the instructions and recommendations below.
Connection to 230 Volts Power Supply
It is important to ensure that the electricity supply is of adequate capacity
for the electrical load required by the appliance being installed.
These appliances must be earthed.
Never fix or place heater near flammable or combustible materials.
Generally heaters must be placed at a safe distance (clear space) of
at least 2.0m from combustible materials and glass walls. If installed
in workshops or garages where inflammable or combustible paints
are used, the heaters must be installed at a distance of at least 4.0m
from the source of danger.
If the heaters are placed in areas where spray painting of any
description is taking place, they should not be used during the
painting operations.
Never use the heater in particularly dusty and explosive areas.
Installation to Wall
Minimum required distances:
• 500mm from the side wall
• 500 mm from the ceiling
• Installation height above 1.8M
•The heater must be fixed to a wall with the bracket supplied to allow
adequate ventilation.
•Never fix or place heater near flammable or combustible materials.
•Generally heaters must be placed at a safe distance (clear space) of at least
2.0m from combustible materials and glass walls. If installed in workshops or
garages where inflammable or combustible paints
are used, the heaters must be installed at a distance of at least 4.0m from the
source of danger.
•If the heaters are placed in areas where spray painting of any description is
taking place, they should not be used during the painting operations.
•Never use the heater in particularly dusty and explosive areas.
