
ASSEMBLY
Attachment to a ceiling
The heater should be assembled to a concrete ceiling. The supplied mounting parts are not suitable for other surfaces.
1.
Drill a hole with a diameter of 8 mm in the ceiling.
2.
Push the self tapping hook screw in the drilled hole.
3.
Tighten the hook firmly.
4.
Hang the heater with the chain to the screw. Ensure that the distance between ceiling and the heater is at least 30
cm. The height between the floor and the heater must be at least 1.80 m.
5.
Route the power cable alongside the chain to the socket. The power cable must be attached to the chain with a pull
strap, but make sure it does not make contact with the first three links of the chain. The power cable must under no
circumstances touch the heater. The heater should not be hung up by the power line.
Attachment to a Gazebo
Make sure the frame of the tent in which the heater is suspended, is sufficiently strong to support the weight of the
heater.
1.
Hook the chain to the heater.
2.
Wind the chain several times around the frame and attach the other end, just like the first, also to the heater. Make
sure that the distance between the point of suspension and the heater is at least 30 cm. The height between the
floor and the heater must be at least 1.80 m.
3.
Make sure the heater hangs securely.
OPERATING INSTRUCTIONS
-
Do a visual check of the patio heater, power cable and accessories before every use! If you notice damage, do not
use the heater but contact your dealer.
-
CAUTION: Risk of Electric Shock. Do not open or try to repair the heater yourself.
-
Never use the heater as a dryer or to heat a sauna.
-
Never use the heater for heating of premises where animals stay.
-
Keep combustible materials, such as furniture, pillows, bedding, paper, clothes, and curtains at least 3ft from the
front of the heater and keep them away from the sides, top, and rear. Do not place towels or other objects on the
heater.
-
A heater has hot and arcing or sparking parts inside. Do not use in areas where gasoline, paint, explosive and/or
flammable liquids are used or stored. Keep unit away from heated surfaces and open flames.
TURNING THE PATIO HEATER ON AND OFF
1.
Insert the plug into the socket.
2.
To turn on the heater pull the cord.
3.
To turn off the heater pull on the cord again.