![Firefield RIVAL XL FOREGRIP FF35010K Скачать руководство пользователя страница 5](http://html1.mh-extra.com/html/firefield/rival-xl-foregrip-ff35010k/rival-xl-foregrip-ff35010k_user-manual_2291475005.webp)
6
7
WARNING
Before handling the laser sight, read and understand the contents of
your firearm’s manual, and the Firefield BattleTek laser/ lights manual.
Follow all standard safety precautions and procedures during firearm
operation, even when the laser sight is not in use.
• NEVER point the laser sight directly at, or into, an eye. This may
cause damage to the eye, or blindness.
• Avoid looking directly into the laser.
• Avoid shining the laser into mirrors or other reflective surfaces.
• ALWAYS check the chamber of your weapon is clear before mounting
or dismounting the laser sight.
• The laser sight should be tested during periods of non-use to make
sure it is still operating properly.
FAILURE to follow standard firearm safety precautions and procedures,
as well as the above warnings, is dangerous and may result in serious
injury, damage to property, or death.
CAUTION-USE OF CONTROLS OR ADJUSTMENT OR PERFOR-
MANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULTS IN HAZARDOUS RADIATION EXPOSURE.
OPERATING WINDAGE AND
ELEVATION ADJUSTMENTS
In order to make windage and elevation adjustments:
1. Locate the windage and elevation adjustments (2).
2. Rotate the windage and elevation adjustments to move the alignment
of the laser dot using the provided hex key.
MAINTENANCE
Proper maintenance of the Firefield lasers and lights is recommended
to ensure longevity. It is recommended to remove the battery to ensure
the laser will not activate during maintenance procedures. When the
sight becomes dirty it should be wiped down with a dry or slightly
damp cloth. To clean off dirt, debris, or oils from the laser’s aperture,
first make sure the laser is deactivated. Apply denatured alcohol to the
cotton swab first and using small circular motions clean the laser’s lens
with the cotton swab. Allow the alcohol to evaporate. Afterward, use
your breath to fog the lens. Immediately afterward use a new cotton
swab to clean the lens again to remove any residue. No further mainte-
nance is required.
180
DANGER
Laser Radiation
Avoid direct
eye exposure
Class IIIa Laser Product