OPERATING INSTRUCTIONS
• Remove the lens cap from the objective lens (5).
• Activate the device by pressing on the “ON” button (2) a stable green indicator will light up.
• Located an object within 20 to 30 meters.
• Rotate the eyepiece (4) until you clearly see the frame of the display and a fine black grid on it.
• To turn on the IR illuminator (6) press the “IR” button (3). A red indicator will light up.
• Rotate the objective lens (5) until you see a sharp image of the objet. The use of the IR-illuminator in
the optimal mode prolongs operating time.
• When changing the viewing distance, try to see sharp and high-quality image by rotating the objective
lens (5). Do not rotate the eyepiece (4) the device has already been individually adjusted.
• After use, switch off the device by pressing the “ON” button (2) the green indicator will go out.
Be careful, observe the polarity shown on the battery cover.
4
BATTERY INSTALLATION
To install the batteries, unscrew the battery compartment cover, insert the batteries into the compartment
so that the positive (+) and negative (-) match the markings on the unit, replace the battery cover
carefully and do not overtighten.
4
