Fired Up Corporation Adam CO907, Инструкция по использованию и уходу, Страница: 5 / 16

0 5
SECTION 01
PLEASE DO NOT OBSTRUCT THE AIR VENTS OF THE HEATER
UNIT
This appliance has a ‘self resetting’ safety cut out
system. To prevent overheating, ensure the air inlets
and outlets are not obstructed. If the safety cut-out
operates, switch off the heater and allow to fully cool
down. Remove any obstruction before re-use.
IMPORTANT ELECTRICAL SAFETY
The plug must always be accessible, after installation,
in order to disconnect the heater from the electrical
supply for maintenance cleaning or isolation in an
emergency.
If the supply cord is damaged, it must be replaced by
the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
This heater must be earthed. The supply cord must be
safely routed from the heater to an electrical socket.
Any new wiring required, must be In accordance with
local and national codes and other applicable
regulations in order to reduce the risk of fire, electric
shock, or other injuries. Always use a certified
electrician should new circuits or outlets be required.
Avoid the use of an extension cord which may
overheat and cause risk of fire. If an extension cord is
necessary, it must be rated above the maximum rated
power of the appliance. Care must be taken to
arrange the cord so that it cannot be pulled or be
tripped over.