FireBird SOLID FUEL HEAT EXCHANGER, Инструкция по установке и обслуживанию

Страница: 3 / 12

2
1.0 INTRODUCTION
We would like to thank you for purchasing a Firebird Solid Fuel Heat Exchanger, hereinafter
referred to as the SFHE. This instruction manual is for reference and installation guidance by
qualified engineers or installers, who are HETAS approved, or equivalent, in solid fuel
heating appliances.
You should ensure that all installation, servicing and commissioning works are carried out
by a competent, qualified engineer. It should be noted that it is the responsibility of the
installer/householder to ensure that this product is properly installed. Failure to do so may
invalidate the warranty.
Please read this manual carefully prior to installation of the SFHE.
2.0 IMPORTANT SAFETY NOTES
• This SFHE must be open vented on the stove side.
• Please ensure that the existing pressurised heating system is installed to all regulations
and operating accordingly.
• Ensure that BS 8303, Code of practice for installation of domestic heating and cooking
appliances burning solid mineral fuel, is adhered to at all times.
• Ensure the following codes and standards are adhered to;
- BS EN 14336:2004 Heating systems in buildings. Installation and commissioning
of water based heating systems.
- BS EN 12828:2012 + A1:2014 Heating systems in buildings. Design of water based
heating systems.
- BS EN 12831:2003 Heating systems in buildings. Method of calculation of the
design heat load.
• Installation must conform to Building Regulations at all times.
3.0 SYSTEM INSTALLATION
The SFHE can be installed to:
a) Link open vented and pressurised heating systems.
b) Avoid relocation of the domestic hot water tank,
hereinafter referred to as the DHW.
c) Avoid awkward pipe installations.