17
Error Signal:
The unit continuously checks the settings of its
sensor and circuitry. If any of these settings are
found to be incorrect the unit will emit a
double
chirp every minute, indicating that a product fault
has been identified.
NOTE:
This does
NOT
mean that the alarm has
detected carbon monoxide.
Low Power Pack Signal:
At the end of the product’s life, it will emit a
single chirp once per minute for up to 30 days.
Replace the product immediately!
If a low
power pack warning is emitted before 6 years
of operation contact the FireAngel Technical
Support team (see below).
On discovering an error signal please contact the
FireAngel Technical Support Line between
9.00am – 5.00pm, Monday – Friday.
Telephone: 024 7623 6663 (1-800 523171 in
Eire)
e-mail: [email protected]
MAINTAINING / TESTING
YOUR DETECTOR
Maintenance
Your detector will alert you to potentially
hazardous CO concentrations in your home when
maintained properly. To maintain your FireAngel
detector in proper working order, and to ensure
that the sensor will last for the lifetime of the
product, it is recommended that you:
• Test the horn, power pack and circuitry of your
detector at least once per week by pressing the
Test/Reset button briefly (see page 12).
• Perform the Sensor Test once every month (see
page 13).
• Keep the detector free of dust by gently
vacuuming the case with a soft brush attachment
once per month.
