How To Install Your Detector
NOTE:This Carbon Monoxide alarm must be installed by a competent person.
To install your unit, follow the illustration below.
We recommend that your detector is installed on the wall.
82.5mm
3 1/4"
1/16"
detector stand
1.75mm
10
To Mount on the Wall:
Drill two 5mm (3/16”) holes into the wall 82.5mm (3 1/4”) apart. Insert the
plastic wall plugs and screw in the screws, ensuring that the screw heads are left sticking out 1.75mm
(1/16”) from the wall. Line up the detector mounting holes with the screws and hook the unit onto the
wall.
To Mount on a Shelf:
Attach the enclosed detector stand to the 2 holes near the bottom edge at the
back of the detector.
Warning: When mounting on a shelf, please adhere to the recommendations on page 8 relating to the
position of the detector.
