Fire Sense 61279, Руководство пользователя

Страница: 7 / 16

- 7 -
1. Attach Wheel Assembly to Base. Line up holes in Wheel Assembly with
corresponding holes in Base and insert 2 - Medium Bolts through holes.
Finger tighten bolts. Be sure that Wheel Assembly is parallel to the Base
and fully tighten the bolts.
Note: For best stability, fill the sand box with sand.
Hardware Used : 2 Medium Bolts
2. Attach the Support Brackets to the Base. Attach the 3 - Support Brackets
loosely to the Base with 3 - Medium Bolts inserted through the holes in the
bottom of the Support Brackets and into the Base.
Hardware Used : 3 Medium Bolts
3.
Attach the Post to the Support Brackets. Once you have tightened the bolts holding the
Support Brackets to the Base, align the holes in the bottom of the Post
with the holes on the tops of the Support Brackets and insert 6 - Large
Bolts through the hole in the Post and through the hole in the Support
Bracket. Affix 6 - Small Flange Nuts to the bottom of the Large Bolts.
Hand tighten initially then tighten with a wrench when all bolts have
been inserted.
Hardware Used : 6 Large Bolts
6 Small Flange Nuts
ASSEMBLY