ontact us for assistance:
(866) 985-7877
|
www.wtliving.com
16
RE & M
INTEN
N
E
W
RNING
FOR YOUR S
FETY
•
Do NOT touch or move fi
e pit for
at least 45 minutes after use.
•
urner is hot to the touch.
•
llow burner to cool before
touching.
To enjoy years of outstanding performance from your fi e pit, make sure you
perform the following maintenance activities on a regular basis:
1. Use warm soapy water for cleaning. Never use flammable o
corrosive
cleaning agents.
2. While cleaning your unit, be sure to keep the area around the burner and
control compartment dry at all times. Do not submerge the control valve
assembly. If the gas control is submerged in water, do NOT use it. It must
be replaced. Make sure fi
e pit has cooled completely before cleaning or
covering with a cover.
. Keep the appliance area clear and free from combustible materials,
gasoline and other flammable vapors and liquids.
. Do not obstruct the fl
w of combustion and ventilation air.
. Keep the ventilation opening(s) of the cylinder enclosure free and clear
from debris.
3.
ir fl
w must be unobstructed. Keep controls, burner, and circulating
air passageways clean. Signs of possible blockage include:
• Gas odor with extreme yellow tipping of flame
• Fire pit does NOT reach the desired temperature.
• Fire pit glow is excessively uneven.
• Fire pit makes popping noise.
• Spiders and insects can nest in burner or orifi
es. This dangerous
condition can damage fi
e pit and render it unsafe for use.
lean
burner holes by using a heavy-duty pipe cleaner.
ompressed air
may help clear away smaller particles.
•
arbon deposits may create a fi
e hazard.
lean burner screen with
warm soapy water if any carbon deposits develop.
Note:
In a salt-air environment (such as near an ocean), corrosion
occurs more quickly than normal. Frequently check for corroded areas
and repair them promptly.
SERVI
E:
Only a qualified servi
e person should
repair gas passages and associated
components.
Caution:
lways allow
re pit to cool
before attempting service.
STOR
GE
:
between uses:
• Turn control knob OFF.
• Disconnect LP source.
• Store fi e pit in an area sheltered
from direct contact with
inclement weather (such
as rain, sleet, hail, snow, dust
and debris).
• If desired, cover fi e pit to
protect exterior surfaces and
to help prevent build-up in air
passages.
During periods of extended
inactivity or when transporting:
• Turn control knob OFF.
• Disconnect LP source and move
to a secure, well-ventilated
location outdoors.
• Store fi e pit in an area sheltered
from direct contact with
inclement weather (such as
rain, sleet, hail, snow dust and
debris).
• If desired, cover fi e pit to
protect exterior surfaces and
to help prevent build-up in
air passages. Never leave LP
cylinder exposed to direct
sunlight or excessive heat.
Note:
Wait until fi e pit is
cool before covering.