Fire Pants Fabrication FIRE ANT, Инструкции по установке

Страница: 12 / 12

12
If your motor and drive has
come pre wired:

Plug the 3 pin electrical
cord into a 240v power
source.

Turn isolating switch on.

Ensure the forward light
is flashing.

Use the potentiometer next
to the key pad to adjust
motor to its lowest speed,
it should display approx.
700 feet per minute.

Push the run button to
start the motor.

Check tracking of belt on
the Fire Ant Grinder.

See instruction manual for
use on the Variable Speed
Drive.
If your motor and drive has not
come pre wired:
Contact a qualified electrician to
wire up the motor and variable
speed drive.

Plug the 3 pin electrical cord
into a 240v power source.

Turn isolating switch on.

Ensure the forward light is
flashing.

Use the potentiometer next to
the key pad to adjust motor
to its lowest speed, it should
display approx. 700 feet per
minute.

Push the run button to start
the motor.

Check tracking of belt on the
Fire Ant Grinder.

See instruction manual for
use on the Variable Speed
Drive.
NOTE: ALL VARIABLE SPEED DRIVES WIRED OR NOT; HAVE BEEN
PROGRAMMED TO SUIT THE FIRE ANT GRINDER.
Your Fire Ant is now ready for use.
Congratulations on your purchase, and thank you for supporting a
local business. Please check in on
www.firepantsfab.com.au
regularly to keep up to date with any improvements, and new
tooling on offer.