14
1. The appliance must be installed 1 meter min. from any flammable materials.
2. The barbeque should be placed on a non-flammable flat surface
3. Ensure
your barbeque is placed in an area that won’t affect its use in bad
weather.
CONNECTING THE GAS CYLINDER TO THE APPLIANCE
This appliance is only suitable for use with low-pressure butane or propane
gas and fitted with the appropriate low-pressure regulator via a flexible hose.
The hose should be secured to the regulator and the appliance with hose
clips.
①
When the diameter of the injector is φ0.91, this barbecue is set to operate
a 28-30 mbar regulator with butane gas and a 37 mbar regulator with propane
gas, or a 30 mbar regulator with butane, propane gas or their mixtures.
②
When the diameter of the injector is
φ0.81, this barbecue is set to operate
a 50 mbar regulator with butane, propane gas or their mixtures.
Use a suitable regulator certified to BSEN 16129: 2013. Please consult your
LPG dealer for information regarding a suitable regulator for the gas cylinder.
REGULATOR AND HOSE
The hose and regulator are not supplied with this appliance. Only hose
complying with the national situation of the country of destination must be
fitted to the appliance. A regulator with the appropriate outlet pressure for the
country of destination must also be fitted. This regulator must comply with the
requirements of EN 16129: 2013.
The hose must comply with the requirements of EN16436-1:2014.
The use of the wrong regulator or hose is unsafe; always check that you have
the correct items before operating the barbecue.
The hose used must conform to the relevant standard for the country of use.
The length of the hose must be 1.5 metres (maximum). Worn or damaged
hose must be replaced. Ensure that the hose is not obstructed, kinked, or in
contact with any part of the barbecue other than at its connection.
The gas supply hose should be checked periodically and should be replaced
at least every two years.
STORAGE
Warning:
-Gas cylinder shall not be placed under the side burner/hob/hotplate during operation.
-Keep the gas cylinder at least 500mm away from barbecue during operation.
-Keep one flexible gas hose straight and not touching any hot surface during operation.
