manualshive.com logo in svg

Fire-Lite Alarms LCD-40 Series, Руководство пользователя

Поделиться
Скачать
Fire-Lite Alarms LCD-40 Series Скачать руководство пользователя страница 4

LCD-40 Series Annunciators

4

Document 50327    Rev D1   1/14/99   P/N 50327:D1

Section 1:          

LCD-40 Series Annunciators 

The Fire•Lite LCD-40 Series Annunciators are compact, attractive, 
40-character, backlit LCD fire annunciators designed for use with the 
MS-9200(C)/E Addressable Fire Alarm Control Panel.  The LCD-40L 
operates the same as the LCD-40, except it does not have function 
switches or a key-switch.  It should be noted that the LCD-40 Series 
A nnunciator displays will mimic the LCD display located on the 
MS-9200 main circuit board.  To ensure that the LCD-40 will operate 
with the MS-9200(C) and the MS-9200E (Export Version), the follow-
ing software must be installed:

If the MS-9200(C) has software with a Part Number 73750 or 73829 
installed, the LCD-40 Series A nnunciator must have software with a 
Part Number 73779 or 73879 installed in order to operate correctly.

If the MS-9200(C) has software with a Part Number #M9200V 20 or 
higher installed, the LCD-40 must have software with a Part Number 
#LCD40V 20 or higher installed in order to operate correctly with the 
FACP.

If the MS-9200 Export Version has software with a Part Number 
73846 installed, the LCD-40 Series A nnunciator must have software 
with a Part Number 73779 or 73879 installed in order to operate 
correctly.  

If the MS-9200 Export Version has software with a Part Number 
#M9200EV 20 or higher installed, the LCD-40 must have software 
with a Part Number #LCD40V 20 or higher installed in order to 
operate correctly with the FACP.

LCD-40

LCD-40L

Technical Manuals Online! - http://www.tech-man.com

firealarmresources.com

Содержание LCD-40 Series





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды