Using several effects pedals or a pedal board with the Red-Eye Preamp:
Connect Effects and/or a Stomp-Tuner in series to the Red-Eye Preamp Effects
Loop.
Effect Boxes and/or Stomp-Tuner will affect the XLR output to the Mix Board.
Using the Red-Eye Preamp with an on-stage Guitar Amp or Instrument PA:
Add any effects boxes you want in series between the Red-Eye Preamp and the
PA.
Red-Eye Preamp works to control the instrument’s treble and gives you a solo
boost button.
Using the Red-Eye Preamp as a passive Direct Interface:
The Red-Eye can also be used as a high-quality passive direct box. The isolation
transformer used in the Red-Eye Preamp has a nearly linear response from 18 Hz
to over 30 KHz.
Power is not required
4,000 ohm input-impedance, single-ended input
600 ohm output-impedance, balanced output
Red-Eye Preamp
Effects Loop
Output Input
Single-Ended
Quarter-Inch Cable
XLR Cable
to Mix Board
Red-Eye Preamp
Effects Loop
Output Input
Instrument
Input
Guitar Amp
or other PA
Red-Eye Preamp
Effects Loop
Output Input
Instrument
XLR Cable
to Mix Board
Input Output
Effect #2
Input Output
Stomp-Tuner
Input Output
Effect #1
