Fire Chief FCOS1800D Скачать руководство пользователя страница 2

Страница: 2 / 30

FIRE CHIEF OUTDOOR FURNACE MANUAL

MODEL: FCOS1800D, FCOS2200D

SAVE THESE INSTRUCTIONS

Congratulations! You have selected the finest quality outdoor wood and coal burning furnace, manufactured with pride in the

USA. Please take a few moments to carefully read the owner’s manual. By taking the time to familiarize yourself with your

new Fire Chief Furnace, you will be able to look forward to years of trouble-free, dependable service.

Installation:

• First, check local codes. The installation must comply with all local rulings and requirements.

• This furnace is an outdoor hot air furnace and must not be altered in any way.

• This furnace requires a back-up electric generator, 2000 watts minimum, in case of power failure.

• Always have a properly installed and functioning smoke detector installed in your home.

• To prevent accidental injury, do not allow anyone who is unfamiliar with the furnace to operate it.

• Spend time familiarizing yourself with your Fire Chief Furnace, especially the different settings and the effects they

have on burn patterns. It is impossible to predict how each setting will affect your furnace, due to variations in

conditions, fuels, and temperatures.

• When making plans to install your outdoor furnace, the first thing you need to think about is the placement of the

unit. Although you can install the Fire Chief Furnace up to 30 feet from the home, a much shorter distance is

recommended to provide better airflow. The furnace has been tested for clearance of 31 inches from the home;

this would give maximum airflow and provide the highest efficiency.

Transportation Damage

Every effort has been made to ensure that your Fire Chief Furnace will arrive in perfect condition. Any visible damage should

be noted on the freight bill at the time of delivery. If upon unpacking your furnace, you find damage has occurred during

transit, notify your dealer immediately. Your dealer will advise you what actions must be taken to correct the problem.

Disclaimer Notice

The listed BTU rating of your new Fire Chief Furnace was obtained using laboratory calculations. The actual BTU output you

experience may vary somewhat depending on the type, condition, and moisture content of the fuel used, damper adjustment,

chimney type and other variables. Therefore, the manufacturer disclaims any guarantee as to the BTU output or capacity

of your furnace. Fire Chief Furnace disclaims any responsibility for the following: installation of a furnace that has been

altered or modified in any way; installation of the furnace other than as instructed in this manual; installation and or use of any

component or part not approved by Fire Chief Furnace for use on this furnace. Be sure to complete and return your warranty

card within 30 days of purchase in order to activate warranty coverage on your furnace.

Manufacturer’s Notice

Please be advised that periodic changes are made to improve the furnaces. Therefore the information in this manual may not

be completely applicable to your Fire Chief Furnace. Please refer to markings on the appliance for additional information.

THIS IS AN OUTDOOR WOOD AND COAL BURNING FURNACE ONLY AND

SHOULD NOT BE ALTERED IN ANY WAY.

Содержание FCOS1800D































Результаты поиска

Содержание FCOS1800D

Отзывы:

Бренды по названию

Популярные бренды

Fire Chief FCOS1800D, Руководство пользователя

Результаты поиска

Содержание FCOS1800D

Отзывы:

Бренды по названию

Популярные бренды