Fire Chief FCOS1600D, Руководство пользователя

Страница: 7 / 30

6
Installing the Anchor Plate:
Note: Check with your dealer for the anchor plate that connects to Class A HT2100 chimney. IMPORTANT: BEFORE YOU FOLLOW
THE NEXT STEPS, ENSURE THE ANCHOR PLATE YOU RECEIVE MATCHES YOUR CHIMNEY PIPE, AS CHIMNEY PIPE IS NOT
GENERIC AND WILL NOT INTERCHANGE WITH OTHER BRANDS.
1. Using the diagram below as a guide, caulk the bottom of the anchor plate around the center pipe shaft.
2. Install the anchor plate to the top of your furnace using four #10 3/4” galvanized screws with rubber gaskets.
3. Install the chimney pipe to your outdoor furnace.
4. After all the chimney components are installed including the cap, follow the diagram below to caulk around the chimney pipe
as well as around the outer edge of the anchor plate.
PLACE A LINE OF
1
4
DIA HIGH TEMPERATURE
SILICONE CAULK ON CHIMNEY ADAPTOR AS
SHOWN BY DASHED LINES
Place a line of high temperature caulk
(1/4 inch diameter) on the chimney
adaptor as shown with dashed line.