Fire Cam 1080, Руководство пользователя

Страница: 5 / 8

Take Still Pictures
To take still pictures with the Fire Cam 1080, make sure that the Video/Photo switch is set to the
left for photo mode. Turn on the Fire Cam 1080 by pressing the Power button.
The camera will start taking photos automatically, the red LED will blink. Press the Power/
Shutter button again to stop taking photos and to go back to the standby mode.
In photo mode the Fire Cam 1080 will take photos every 3 seconds. It stops automatically if the
battery is empty or if the micro SD card is full.
Transfer files on your computer
Unscrew the rear cap, switch to right for video mode, connect with your computer via USB cable
from the USB port, then turn on the camera. The camera will recognize automatically as USB
device. Or you can take out the micro SD card and use your own card reader to connect with
your computer.
The camera must be powered on while connected with computer for
data download. Don’t remove the battery! When you remove the
battery while the video is playing, damage to your video data will
occur!
Do not remove the USB cable under "Mass Storage" status!
Please switch off the camera before removing the USB cable!
On a MAC
Simply plug the Fire Cam 1080 into your MAC with the included USB cable, turn your the
camera on and the MAC OS will recognize the Fire Cam 1080 as an external hard drive.
IMPORTANT TIP FOR MAC USERS
When deleting files from your MicroSD card, you must empty the trash before
removing it or unplugging the Fire Cam 1080. If you do not empty your trash, the
photos and video files will not be erased from your card.
Removing/Installation battery
The battery is designed to be very tight inside of the camera to maximize reliability in high
vibration activities. To remove the battery, pull it straight out. Intentionally it is not easy to do,
but the battery will remove.