12
BUTTON
FLAME
COLOR
HEATER
TEMP
FUNCTION
ACTION & INDICATION
1. Press once: Touch panel indicator becomes active.
2. Press again until desired setting is reached. Digital display shows setting circles as belows.
Heater button: Turns heater on and off.
NOTE: The heater only works when the flame
fireplace is ON. If the flame effect is OFF, the
heater will not turn on.
NOTE: To prevent overheating, the heater blows
cool air for 10 seconds before the heater turns
on, and after it turns off.
1. Press once and the indicator lig hts up.
Fan blows cool air for 10 seconds. Low heater
turns on and blows warm air.
2. Press again and the indicator lig hts up.
Hig h heater turns on and blows hot air.
3. Press again and the heater turns OFF.
The fan blows cool air for 10 seconds
and then turns off.
1. Press once to change the ember color.
2. Press again until desired setting is reached.
Total 10 different ember colors.
3. Auto-cycle function 11, the LED ember lig ht
will do auto-cycling. It will take 15 seconds
to switch between colors.
LED Ember lig ht color button: Changes the color
of the embers below the crystals/logs.
NOTE: Ember color effect stays on until power
button is turned off.
NOTE: The fireplace will remember the last flame
color used when the fireplace is turned off.
Unplugging the fireplace will reset the color
to the default color.
LED Ember lig ht brig htness button: Makes
the LED ember lig hts on bottom effect gets
changing.
Flame Speed button:
Controls the speed of the flame.
Fire cracker button:Controls the sound of the
firecracker. There are 3 settings:
(Hig h) - (Low) - (Off).
NOTE: Default setting is Hig h when turned on.
1. Press once. LED ember lig ht color effect
gets changing.
2. Press again until desired setting
is reached. In total 5 levels
1. Press once to change the flame speed.
2. Press again until desired setting is
reached. There are 3 flame speed settings.
NOTE: The Default setting is 02
(medium speed).
1. Press once. Fire cracker goes
to Lower sound.
2. Press again. Fire cracker goes off.
NOTE: Press the button for 5 seconds to switch between °C and °F
Flame Color button: Changes the color flame
effect.
NOTE: Color effect stays on until power button
is turned off.
NOTE: The fireplace will remember the last flame
color used when the fireplace is turned off.
Unplugging the fireplace will reset the color
to the default color.
1. Press once to change the flame color.
2. Press again until desired setting is reached.
Total 6 flame colors.
Operation
EMBER
FLAME SPEED
CRACKER
EMBER
COLOR
BRIGHTNESS
