STARTING AND USE INSTRUCTIONS
UBF 28 NEW
3.6 SAFETY DEVICES
The machine is equipped with the following safety devices.
¾
Socket (battery version)
(picture 3.1), the same socket used for the battery charger. In case of
emergency, this socket must be taken away from the plug by means of its handle.
The operator must be trained about safety rules. Do never restore this safety system before the
problem has been sorted out. If it is necessary ask for the technician help.
¾
Micro under seat
(picture 3.1): under the operator seat there is a micro that prevent the machine
from working if the operator is not seat onboard. In the same way, if the operator lifts up without
switching off the motor, the machines stops automatically. To start the machine again, set the
ignition key to “off”, seat on the machine, then switch it on again.
3.7. OTHER DANGERS
FIORENTINI S.r.l. analyzes – starting from the design of the machine - all the dangers that can occur while
the machine is operating in order to prevent or at least low the operator’s accidents. Thanks to a series of
signals on the machine the operator can avoid many risks that can occur.
This kind of ranger can occur:
•
during the brushes regulation;
•
during the batteries/endothermic motor maintenance.
Whilst regulating the side brushes, the central brush and the central washing brushes, the ignition
key must be kept away from the dashboard in order to avoid the casual starting of the machine.
Whilst the batteries recharge, the operator must pay attention that any parts of his/her body enter the
batteries room.
Special labels stuck on the brush cover or on the recovery tank prevent dangers to the
operator (see § 3.7.).
TURNOVER
SQUASHING DANGER
PICTURE 3.1
