FIORENTINI TX020, Руководство пользователя

Страница: 7 / 14

7
TRANSPORT
PACKED MACHINE HANDLING
The machine is packed in a case fixed on a special pallet. On the case it is indicated the gravity centre with a
black arrow. The pallet must be forked in the middle of the side with the black arrow in order to avoid
overturning. The case should be handled with extreme caution. It is forbidden to lay cases on each other.
Case Dimensions (LxWxH): 1670x900x1200 mm.
HOW TO UNPACK THE MACHINE
1. Cut the plastic bands. Pay attention to the spring back.
2. Remove the clips that fix the carton to the pallet.
3. If the case is made of plywood, remove the clips from the each side and the base.
4. Remove the plastic bands that hold the machine.
5. Place the machine on the ground.
UNPACKED MACHINE HANDLING
1. Check the machine and install the batteries if they are not installed.
2. If the machine has to be handled for a short transport, disconnect the battery cables. It is recommended
to pack the machine again in its original case if it has to be handled for a longer transport.