MAINTENANCE
SP 500 NEW
Rev. 00
28/04/09
Pag. 25/31
5. MAINTENANCE
5.1. MAINTENANCE SCHEDULE
To keep a good efficiency of this sweeper machine and grant a good reliability during the warranty period, it is
recommended to make a periodic maintenance using the schedule reported in this manual.
Authorized personnel only can service this machine, particularly for electrical and
electromechanical parts using suitable tools and equipment for every intervention.
For assistance and spare parts address exclusively to Fiorentini S.r.l. (point7.1. / 7.2.).
OPERATION
WHAT TO DO
FREQUENCY
Cleaning up
Clean the dust recovery tank
Every day
Do not use corrosive substances
Check if vacuum hoses are cleaned
Check the motor oil (petrol engine version)
Every week
Controls
Check the status of rubber blades close to
the roller brush
Check the batteries water lever (battery
version)
Every 15 days
Check the vacuum filter
Every month
Check the battery cables (battery version)
Every 6 months
Check the status of all motors carbon
brushes
Every year
Check the safety devices
Check the electric system
Every year
5.2 BATTERY MAINTENANCE (battery version)
The status of battery charge can be checked by the operator when the machine is working, thanks to the battery
charge indicator situated on the control board
The indicator gives the following information:
Green led: charged batteries
Yellow led: slightly charged batteries
Red led: exhausted batteries
The operator must keep the battery room open during the batteries recharge. Moreover:
It is forbidden to use flames and/or to smoke near the batteries;
Pay attention to the battery acid;
Do not develop sparks near the batteries;
Pay attention to the batteries gazes, which can burst;
Do not invert battery polarities.