11
1.
wash the surface with the squeegee up and the brushes down;
2.
activate the brushes;
3.
press the solution solenoid valve switch;
4.
leave the solution on the surface to dissolve the dirt;
5.
do a second washing with brushes and squeegee down, the suction activated and the
solution solenoid valve opened.
DETERGENT QUANTITY
During the cleaning the operator can control the detergent quantity by means of a
cock, which is on the left of the machine frame.
Important:
before checking the water quantity that flows to the brushes, make sure
that the ignition key is not in the dashboard in order to avoid a casual starting of the
machine.
Picture 7
W
ATER UNLOAD
The scrubber machine is equipped with two pipes for water discharge (pictures 8-a and
8-b):
If you need to discharge water from the tanks, you have to place the machine on a
dump well, release the pipe of the tank and open the rubber cap at the end of the pipe
itself.
Picture 8-a Picture 8-b
1. water lever
1
