INSTRUCTIONS FOR STARTING AND USE
I 16/18 NEW
Rev. 00
22/05/08
Pag. 27/36
4.7.7 WATER DISCHARGE
This autoscrubber machine is equipped with two water discharge pipes (picture 4.15):
Recovery tank pipe (particular 1 picture 4.15)
Suction pipe (particular 2 picture 4.15).
Moreover the machine is complete with a flexible pipe (detail 3 picture 4.15) which sucks the dirty water.
To empty the water from the pipes put the machine on a drain well, disconnect the pipe to discharge and
open the rubber cap on the top of it.
4.7.8 BRUSH REPLACEMENT
To substitute the brushes do as it follows:
Remove the ignition key to avoid casual starting.
Empty both recoveries of the machine.
Lift up the machine.
Release the brushes pulling them to the bottom.
To insert a new brush is necessary to place it underneath the plate, then pushing it on. (detail 1
picture 4.13).
PICTURE N° 4.15
PICTURE N° 4.13
1
2
3
1
