10
BRUSHES REPLACEMENT
How to attach the brush in order to fix the brush is necessary:
o
Place the machine on the brush, keeping the brush plate up
o
Switch on the brush and lift down the brush plate and allows the brush to be fixed
o
In order to replace the brush is necessary to lift up the brush switch off the brush switch, the brush automatically
goes away.
N.B.
It is not necessary to move the brush cover to do all those operations.
Fig. 4
Fig. 5
SAFETY, MAINTENANCE AND INSPECTION
GENERAL SAFETY RULES
Before using the machine ,instruct all operators to read carefully the charter ”SAFETY
STANDARDS “WARNING.
o
The manufacturer can make any changes to the machine, for constructive or commercial
reasons, without being obliged to change the instruction manual at the right time according to
these modifications.
o
The person responsible for the machine must adhere to CEE rules and to the local standards as
well, regarding the working environment for operator’s safety and health purposes.
o
Before starting the machine ,always perform the preliminarily checks. The safety standards
which involve any dangers, mentioned in the manual text, can be recognized by the symbol:
CAUTION.
o
Beyond the standard listed hereunder, the person responsible for the machine must comply with
the rules provided by the law in force regarding personnel’s safety and health in the working
stations. Furthermore, the person responsible for the machine must instruct the operators on
what follows:
o
Safety and accident prevention standards
o
Specific standards regarding the machines
o
Location on the machine of emergency pushbuttons or similar mechanism, for a prompt
operation. The fixed or movable protections(carters)should always remain in their
position, correctly fixed with perfect integrity during all procedures regarding the
normal operation. If, for any reason ,the carters are removed, their efficiency should be
restored before restarting the machine.
o
Use the machine only under technically unexceptionable conditions and in compliance
with its destination, by observing the safety and prevention standards according to the
prescriptions contained in the instruction and maintenance handbook.
o
Remove (or let remove) immediately any failures which could compromise the safety.