START-UP AND OPERATION INSTRUCTIONS
I42 I60 TP - GB
Rev. 000
27/11/2017
15/34
3.9. SAFETY SIGNALS
The safety signs include symbols indicating:
DANGER
Danger symbols are triangular with black
pictograms on yellow background
PROHIBITION
Prohibition symbols are round with black
pictograms on white background and a red
stripe
What is it?
This symbol indicates a crushing risk caused by the presence of
moving parts inside the machine or by the operator actuating
moving parts inside the machine (e.g. covers and partitions).
What to do?
During installation or maintenance make sure that the ignition key is
not in the dashboard. Ensure that any stops provided for moving
parts are in the right position and carry out their design function
correctly.
What is it?
This symbol warns that it is forbidden to remove safety guards from
around moving parts.
What to do?
During installation/maintenance, before removing guards always
ensure that the starter key is not in its slot in the control panel. Keep
all body parts out of the machine during work.
What is it?
Symbol warning of explosion risks during battery charging due to the
released hydrogen.
What to do?
During battery charging, ensure that the machine is under a suction
hood or in a ventilated area and keep it away from heat sources and
corrosive substances.
What is it?
Symbol warning of fire risks during battery charging due to the
released hydrogen.
What to
do?
During battery charging, ensure that the machine is under a
suction hood or in a ventilated area and keep it away from
heat sources and corrosive substances.
What is it?
This sign indicates that it is forbidden to wash the concerned part of
the machine with pressurised water jets.
What to do?
Do not direct high-pressure water jets against guards or covers
carrying this symbol.
