Finn EAGLE 250, Руководство оператора и каталог запасных частей

Страница: 16 / 38

12
MONTHLY:
1. Lightly lubricate the drive chain on each side of the machine. Remove chain access panel on side of
chain guard. Apply a general-purpose oil onto the drive chain. Replace chain access panel. Repeat
on other side.
2. Lubricate the Skid Steer per the lubrication chart on page 13.
3. Check the hydraulic oil level and top off as necessary.
4. Clean the engine air filter. See engine manual.
4. Visually inspect pivot pins for wear. Replace if necessary.
6. Check hydraulic lines and hoses for leaks, loose fittings, wear and deterioration. Immediately tight-
en any leaks or make any necessary repairs before operating.
7. Perform a good general inspection of machine and attachments. Repair or replace any worn or dam-
aged parts. Keep equipment in good operating condition.
ANNUALLY:
1. Change the hydraulic oil and filter.
2. Paint any bare or scratched metal surfaces.
3. Check and tighten all fasteners.
4. Check chain drive assembly. Jack up one side of the machine. Remove the tires and the chain
guard. Check that the chain tensioners (white plastic pieces) are pivoting freely and show no signs
of abnormal wear. Replace the chain guard and the tires. Be sure to properly torque the lug nuts.
Lower the machine back to the ground. Repeat on the other side.