Finn Bark Blower BB1216 страница 32 Скачать руководство пользователя | Manualshive

Страница: 32 / 77

background image

26

While in the PANEL OPERATE menu screen (see Figure 9), the operator can set the Airlock Speed,
Floor Speed, and Engine Speed. The Floor, Material, Water (Dust Control), Quick Dump, and Seed
Injection (SI) can all be turned either ON or OFF in this menu. The operator also has the ability to
choose a preset program in the PANEL OPERATE menu screen.

By pressing the buttons now labeled Throttle Increase and Throttle Decrease, you can either
increase or decrease the Engine Speed. By pressing the buttons now labeled Material Increase
and Material Decrease, you can either increase or decrease the Floor Speed. The Floor and Airlock
Speeds will range from 0% of capacity to 100% of capacity in 1% increments. The Engine Speed
selection ranges from 1,250 rpm (idle) to 2,650 rpm (full throttle) in 1 rpm increments.

To turn the Floor ON or OFF, press the Floor ON/OFF toggle-button. To turn the material feed on,
press the Material START/STOP toggle-button.

See Figure 10, below, for the Airlock Speed and Floor Speed for the three saved programs. To
change the settings for any of the programs, use the control knob of the Main Control Panel. Turn
the knob either left or right to highlight the setting you want to change. Once you have highlighted
the setting you want to change, press in on the control knob. After pressing in on the control knob,
turn the knob either left or right to either increase or decrease the setting. Once you have changed
the setting, press the control knob in to deselect that setting. If you want to save the settings after
you have changed them, press the Save button on the bottom-right of the screen. You can access
the PROGRAM SETTINGS menu screen from the MAIN menu screen (see Figure 7, page 24).

Figure 9

Figure 10

«
...
30
31
32
33
34
...
»

Содержание Bark Blower BB1216














































































Отзывы:

Нет отзывов

Похожие инструкции для Bark Blower BB1216

Бренд: Queclink Страницы: 10

Бренд: SanDisk Страницы: 2

Бренд: Ortus Страницы: 11

KAAN Standard Plus

Бренд: Kobil Страницы: 73

Бренд: Sealey Страницы: 3

Бренд: Sealey Страницы: 3

Бренд: Sealey Страницы: 5

Бренд: Sealey Страницы: 8

Бренд: Schlumberger Страницы: 22

Бренд: Trust Страницы: 8

TR22A KNX Series

Бренд: Eelectron Страницы: 2

Бренд: PSB Страницы: 9

108618 - Imatumi Media Reader Card

Бренд: LaCie Страницы: 24

Бренд: Bafo Страницы: 2

Бренд: Gandy Страницы: 17

Бренд: Hama Страницы: 24

Бренд: Yard Tuff Страницы: 12

Бренд: Hama Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды