Finlux FN-VM1001BA, Руководство по эксплуатации

Страница: 6 / 24

EN-5
Easy assembly
1. Slide in the battery to place below the
handle of the vacuum cleaner and
make sure it is firmly attached. (Fig. 1).
2. Slide telescopic tube onto cordless
vacuum cleaner until it clicks (Fig. 2).
3. Push telescopic tube into motorized
floor nozzle until it clicks (Fig. 3).
How to install wall mount (it is
optional. The vacuum cleaner is
designed to be freestanding)
• Choose location near power outlet.
Locate point high enough on wall to al-
low telescopic tube and motorized floor
nozzle to hang freely.
• Place mount against wall and use pencil
to mark drill holes.
• Drill holes (with 1/4” bit) and insert
drywall anchors. Insert screws through
holes on mount and tighten until firmly
attached (Fig. 4).
How to charge battery and store ac-
cessories (Fig. 5)
• Place assembled vacuum cleaner on
wall mount or leave freestanding.
• Plug in charger in the power socket
then into charger port on hand vac.
• Attach tools to storage compartments
on the wall mount.
Battery indicator lights show level of
charge
(Fig. 5)
• Indicator lights will stop flashing once
fully charged.
• For the first time the battery should be
charged in full in order to maintain its
performance. This may take up to four
hours.
1
4
5
3
2
Click!
Click!
Battery
indicator
lights
Drywall anchors
Cord
clip
Tool storage compartments
Cord
clip