English
- 39 -
NOTE: When connecting
a device via the YPbPr or
Side AV input, you must
use a connection cables
to enable connection. See
the illustrations above.
|
To enable PC audio, you
will need to use the SIDE
AV CONNECTION cable’s
WHITE & RED inputs.
| If an
external device is connected
via the SCART socket, the TV
will automatically switch to AV
mode.
| When receiving DTV
channels (Mpeg4 H.264) or
while in Media Browser mode,
output will not be available
via the scart socket.
| When
using the wall mounting kit
(optional), we recommend
that you plug all your cables
into the back of the TV before
mounting on the wall.
| Insert
or remove the CI module only
when the TV is SWITCHED
OFF. You should refer to the
module instruction manual
for details of the settings.
| Each USB input of your TV
supports devices up to 500mA.
Connecting devices that have
current value above 500mA may
damage your TV.
Getting Started
Connections
Connector
Type
Cables
Device
Mini Scart
Connection
(rear bottom)
Mini Scart adapter
cable
VGA
Connection
(back)
PC/YPbPr
Audio
Connection
(back)
Side Audio
YPbPr or PC Connection Cable
(not supplied)
HDMI
Connection
(bottom&side)
SPDIF
(Coaxial Out)
Connection
(bottom)
Side AV
(Audio/Video)
Connection
(side)
Side AV
Connection Cable
(supplied)
Headphone
Connection
(side)
YPbPr Video
Connection
(side)
YPbPr Connection
Cable(not supplied)
USB
Connection
(side&back)
CI
Connection
(side)
CAM
module
Subwoofer
Connection
(back)(*)
(*) For external subwoofer connection
If you want to connect a
device to the TV, make
sure that both the TV and
the device are turned off before
making any connection. After the
connection is done, you can turn
on the units and use them.
