Finlux 22F6020W, Руководство пользователя

Страница: 9 / 36

- 8 -
SCART 4. input or output for external devices. Connect the SCART cable between the SCART socket on the
TV and the SCART socket on your external device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.
Note : S-VHS signal is supported via the scart socket(optional).
VGA Input 5. is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
SPDIF Out 6. outputs audio signals of the currently watched source.
Use an SPDIF cable to trasfer audio signals to a device that has SPDIF input.
Viewing the Connections - Side Connectors
The CI Slot is used for inserting a CI card. A CI card allows you to view all the channels 1.
that you subscribe to. For more information, see “Conditional Access” section.
Side USB input.
2.
Note: That programme recording feature is available via this USB input. You can connect
external hard disk drives to this input.
Side audio-video connection input is used for connecting video and audio signals of 3.
external devices. To make a video connection, you must use the supplied AV connection
cable for enabling connection. First, plug the single jack of the cable to the TV’s Side AV
socket. Afterwards, insert your video cable’s (not supplied) connector into the YELLOW
input (located on the plural side) of the supplied AV connection cable. The colours of the
connected jacks should match.
To enable audio connection, you must use RED and WHITE inputs of the side AV
connection cable. Afterwards, insert your device’s audio cable’s connectors into the RED
and WHITE jack of the supplied side AV connection cable. Colours of the connected jacks
should match.
The headphone jack is used for connecting an external headphone to the system.
4.
Connect to the HEADPHONE jack to listen to the TV from headphones.
The Control switch allows you to control the Volume/ Programme/ Source and Standby-
5.
On functions of the TV.
To change volume: Increase the volume by pushing the button up. Decrease the volume by pushing the
button down.
To change channel: Press the middle of the button, the channel information banner will appear on screen.
Scroll through the stored channels by pushing the button up or down.
To change source: Press the middle of the button twice, the source list will appear on screen. Scroll through
the available sources by pushing the button up or down.
To turn the TV off: Press the middle of the button down and hold it down for a few seconds, the TV will turn
into standby mode.
MODE
o
MB62_[GB]_(01-TV)_woypbpr_IDTV_PVR_NICKEL17_1900UK_22930LED_10079371_50220325.indd 8 MB62_[GB]_(01-TV)_woypbpr_IDTV_PVR_NICKEL17_1900UK_22930LED_10079371_50220325.indd 8 08.05.2012 13:51:02 08.05.2012 13:51:02