- 12 -
Basic Operations
You can operate your TV using both the remote
control and onset buttons.
Operation with the Buttons on the TV
Volume Setting
You can use the control switch to change the
•
volume of the TV. To increase volume, please move
the switch upward. Move the switch downward to
decrease the volume. A volume level scale (slider)
will be displayed on the screen.
Programme Selection
First press the control switch once to change
•
channel. You can move the switch upward to select
the next programme or move it downward to select
the previous programme.
Viewing Main Menu
The Main Menu screen cannot be displayed by using
•
the control switch on the TV.
AV Mode
Press the control switch consecutively until the
•
source OSD is displayed on the screen.
Operation with the Remote Control
The remote control of your TV is designed to control
•
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
Volume Setting
Press
•
V+
button to increase the volume. Press
V-
button to decrease the volume. A volume level scale
(slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
Press
•
P-
button to select the previous programme.
Press
•
P+
button to select the next programme.
Programme Selection (Direct Access)
Press the numeric buttons on the remote control to
•
select programmes between 0 and 9. The TV will
switch to the selected programme.
First Time Installation
IMPORTANT: Ensure that the aerial is connected
and a Common Interface module is not inserted
before switching on the TV for the first time
installation.
When the TV is operated for the
fi
rst time, the
•
installation wizard will guide you through the
process. First, the language selection screen will
be displayed:
Use “
•
” or “ ” buttons to select your language
and press
OK
button to set the selected language
and continue.
After selecting the language, “
•
Welcome!
” screen will
be displayed, requiring you to set
Country,Teletext
Language
and
Scan Encrypted
options.
By pressing “
•
” or “ ” button, select the
country
you want to set and press “ ” button to highlight
Teletext Language
option. Use “ ” or “ ” button
to select desired Teletext Language.
Press “
•
” button after setting Teletext Language
option.
Scan Encrypted
will be then highlighted.
You should set the
Scan Encrypted
as
Yes
if you
want to scan coded stations.Afterwards select the
desired Teletext Language.
Press
•
OK
button on the remote control to continue
and the following message will be displayed on the
screen:
01_MB62_[GB]_woypbpr_IDTV_PVR_NICKEL17_5110UK_22965LED_10073947_50192713.indd 12
01_MB62_[GB]_woypbpr_IDTV_PVR_NICKEL17_5110UK_22965LED_10073947_50192713.indd 12
12.09.2011 17:09:52
12.09.2011 17:09:52
