5
Model Number and Serial Number
Record the model number and serial number below for future reference. This is important information when ordering replacement
parts or when technical assistance is required. The numbers are found on a label located on the motor adapter.
MODEL NUMBER ___________________________
SERIAL NUMBER __________________________
Chemical Reaction Disclaimer
The user must exercise primary responsibility in selecting the products materials of construction, which are compatible with the
fluid(s) that come(s) in contact with the product. The user may consult Finish Thompson, Inc. (manufacturer) and a manufacturer’s
representative/distributor agent to seek a recommendation of the products material of construction that offers the optimum available
chemical compatibility.
However neither manufacturer nor agent shall be liable for product damage or failure, injuries, or any other damage or loss arising
out of a reaction, interaction or any chemical effect that occurs between the materials of the products construction and fluids that
come into contact with the products components.
Safety Precautions
WARNING:
READ THIS MANUAL COMPLETELY BEFORE INSTALLING AND OPERATING THIS UNIT. FAILURE TO FOLLOW THESE
PRECAUTIONS CAN RESULT IN SERIOUS INJURY OR DEATH.
WARNING:
Hot surfaces. This pump is capable of handling liquids with temperatures as high as 300F (149C). This may
cause the outer areas of the pump to become hot as well and could cause burns.
WARNING:
Rotating Parts. This pump has components that rotate while in operation. Follow local safety standards for locking
out the motor from the power supply during maintenance or service.
WARNING:
Chemical Hazard. This pump is used for transferring many types of potentially dangerous chemicals. Always wear
protective clothing, eye protection and follow standard safety procedures when handling corrosive or personally harmful materials.
Proper procedures should be followed for draining and decontaminating the pump before disassembly and inspection of the pump.
There may be small quantities of chemicals present during inspection.
WARNING:
Never run pump at less than minimum flow or with the discharge valve closed. This could lead to pump failure.
WARNING:
The pump and associated components are heavy. Failure to properly support the pump during lifting and move-
ment could result in serious injury or damage to the pump and components.
CAUTION:
This pump should never be started without liquid in the casing. IT CANNOT BE RUN DRY WITHOUT CAUSING DAMAGE
TO THE PUMP. It is recommended that run dry protection be used. Optional electronic power monitors are available to help protect
against run dry.
CAUTION:
Never start or operate with a closed suction valve.
WARNING:
Operation without priming or against a closed discharge valve can result in high temperatures that can result in
injury or damage to pump components.
CAUTION:
Always provide adequate NPSHa (net positive suction head available). It is recommended to provide at least 2 feet
(61 cm) above the NPSHr (net positive suction head required).
CAUTION:
If pump is used on variable speed drive, do not exceed the frequency for which the pump was designed (for exam-
ple, if the pump is a 50 Hz model, do not exceed 50 Hz).
