Manual
Finhol™ Natural Tube Series - Buffer
Congratulations and thank you for purchasing a FINHOL
product. FINHOL produces at highest standards. All Finhol
products are strictly quality inspected before delivery.
The Tube Buffer is based on a single-stage ECC82 tube cir
-
cuit. The device is an impedance converter which produces
from a high impedance guitar signal a strong low-impe-
dance output signal.
The Tube Buffer should be connected in between the guitar
and the following signal path.
And here‘s a special feature:
The Tube Buffer can be used, even if there is tube technolo-
gy inside, with any standard 9 volt / 500mA switching power
supply, which is not part of the delivery.
Warning!
Store the product in a place that is neither excessively dry nor exces
-
sively moist. And since the temperature influences the humidity neither
exces-sively hot nor excessively cold.
Don`t take this product apart and don`t try to repair it yourself.
Always keep this product in a case or gigbag, to it`s safety.
Technical Data
• Die-cast aluminum housing
• Weight approx. 300 gr.
• Dimensions: 145 x 95 x 50 mm
• Input / Output: 6.3 mm unbalanced
• DC power jack: 9 V power supply (- Pin / + Housing)
• CE, ROHS, Made in Germany
Finhol
Musical Instruments GmbH
Nobelstr.9-13
76275 Ettlingen
Geschäftsführer: Udo Amend
Registergericht: Amtsgericht Mannheim
Nobelstr. 9 - 13 • D-76275 Ettlingen
www.finhol.de • [email protected]
HRB: 106334 • St. Nr.: 35006/04661 • USt-IdNr.: DE156664640
