Finglai
▇
Use examples
Example 1: The controller needs to turn off the load after 20 minutes. First, press "C" to clear the
original setting, press "
分
" key to set 20, press "
起动
/
暂停
" to start the work, will stop work after 20
minutes, and automatically save the memory. The next time you press "
起动
/
暂停
" key is still 20
Minute countdown.
Example 2: The controller needs to open for 20 minutes and stop for 10 minutes in an infinite loop.
First press
“
C
”
key to clear the original setting, press "
分
" key to set 20, then press "
设定
" key, the
screen displays OFF, press "
分
" to set 10, and finally press "
起动
/
暂停
" key to start the infinite loop
work .
Example 3: The controller needs to open for 20 minutes and stop for 10 minutes. The total cycle time
is 5 hours. First press
“
C
”
to clear the original setting, press "
分
" key to set 20, then press "
设定
"
button, the screen displays OFF, press "
分
" to set 10, then press "
设定
" button. The screen shows "D",
Press "
时
" to set 5, and finally press "
起动
/
暂停
" to start cycle time work. (Note: The cycle of the period,
the end is the point that total time reach, that is to say, if the controller is in the open state after 5 hours,
it will still stop running).
▇
Note
1. In order to prevent the contact from heating under the strong current, the connection between
controller and electrical appliance or power supply should be firm. Must connect the controller the
rated voltage.
2. Do not use this control switch for these devices (such as medical equipment and large equipment)
that may cause life-related accidents or have a major impact on society due to errors in the time
control switch.
3, The switch should work in the absence of moisture, corrosion and heavy metal content of gas
environment, do not be infected with oil or water.
▇
Wiring diagram
▇
External dimensions:
16A
Load
IN
Live wire
Switch
Neutral wire
Power
Electronic timer
54mm
60mm
32mm
21mm
60mm
Φ3.2x4
起动
/
暂停
分
54mm
秒
AUTO
时
MO
设定
C
www.finglai.com
