Finglai
L702 infinite loop digital time switch manual
▇
Summary:
L702 time switch has the function of single countdown, loop countdown, loop countdown in a period.
Single countdown function is suitable for aperiodic switch control, loop countdown function is suitable
for periodic switch control, loop countdown within the time period is suitable for specified total time
period or loop times, can be used as a time relay. It is mainly used for industrial drying, Aging, drying,
ventilated irrigation, etc.
▇
Display:
Time segment function on
H Min S
D
ON
On and off's function selection
OFF
▇
Technical parameters:
Supply voltage: 220Vac, 110Vac, 50/60Hz; 12Vdc/ac, 24Vdc/ac
Contact rating: 16A@250VAC
Power consumption: 2W max
Time range: 1s to 99h59min59s
Loop period: 1s to 99h59min59s
Operating temperature: -20 to 55
℃
Error correction: 1s/days (25
℃
)
Power reserve: 60 days
Inner battery: 1.2V40Ma (Rechargeable)
External dimensions: 60x60x32 mm
Net weight: 65g
▇
Operating Instruction:
Keys' English meaning:
设定
-Set
时
-Hour
分
-Minute
秒
-Second
起动
/
暂停
-Start/Pause
1. Press "C" key to reset before use. The display shows 0:00 00 and it is flashing.
2. Press "
时
", "
分
", "
秒
" keys to set the "ON" countdown time, the screen displays
“
ON
”
.
3. Press the "
设定
" button, and then press the "
时
", "
分
", "
秒
" keys to set the "OFF" countdown time,
the screen displays
“
OFF
”
.
4. Press the "
设定
" button again, it display "D" (total working time) above the seconds. Press "
时
", "
分
", "
秒
" to set the total time for on-off cycle.
5, When finish the time set, press "
起动
/
暂停
" button to start the countdown work
6, If only use a single control, can set it by 1,2,5 steps, if need an infinite loop countdown, can set it by
1,2,3,5 steps, if need to specify the total time of cycle work, can set it by 1,2,3,4,5 steps.
www.finglai.com